ecxx-60-2 picmicro and pic are trademarks of microchip technology inc. arm is a trademark of arm plc. ecio and e-blocks are trademarks of matrix multimedia limited. page 1 copyright ? 2008 matrix multimedia limited ? usb programmable microcontrollers ? 0.6?dip footprint ? supplied with a free version of flowcode ? e-blocks compatible ecio40p ECIO28p ecrm40
ecxx-60-2 picmicro and pic are trademarks of microchip technology inc. arm is a trademark of arm plc. ecio and e-blocks are trademarks of matrix multimedia limited. page 2 copyright ? 2008 matrix multimedia limited what does it do? ecio devices are powerful usb programmable microcontrollers with 28 and 40 pin dil (0.6?) footprints. benefits ? allows you to add usb programmability to your projects ? low cost microcontroller programming, platform for development and learning features ? programmable from usb ? includes bootloader software ? can draw power from usb ? usable with labview and vb, c++ etc description the ecio family of usb programmable microcontrollers provides an incredibly simple way of adopting microcontroller technology into your projects. the device behaves just like a normal microcontroller - but when you plug the usb lead in and press the reset switch you can send a new program to the device. this makes the ecio one of the lowest cost usb programmers in the world. currently there are three products in the range: ECIO28p and ecio40p, and the ecrm40. ecio-28p and ecio- 40p devices are based on picmicro 18 series devices - the 18f2455 and the 18f4455 respectively. the ecrm40 is based on an atmel at91 arm 7 processor. ecio microcontrollers are pre-programmed with a bootloader program which allows you to send a new program to the microcontroller via usb. ecio is compatible with hex code from any appropriate compiler. ecios are directly compatible with flowcode - a graphical programming language which greatly simplifies the code generation process - but can also be used with any c compiler. ecio is suitable for use where direct programming from usb is required: for projects, or where systems need reprogramming in the field. ecio is well supported with a wide range of learning and development tools includin g flowcode and e-blocks. introduction ecio-40p download software
ecxx-60-2 picmicro and pic are trademarks of microchip technology inc. arm is a trademark of arm plc. ecio and e-blocks are trademarks of matrix multimedia limited. page 3 copyright ? 2008 matrix multimedia limited 1.usb socket 2.picmicro microcontroller device 3.4mhz ceramic resonator 4.power / programming led 5.reset switch 6.power selection jumper 7.device pins - 0.6? dil compatible picture shows ecio-40p. ecio-28p is similar. package details - ECIO28p, ecio40p ecio-40p processor 8 bit 18 series picmicro base chip: pic18f4455 oscillator: 4mhz ext., 48mhz internal io lines: 30 a/d: 13 x10 bit a/d sample rate 100ksps program memory 24k bytes ram 2k bytes eeprom 256 bytes power 5v, usb or external pwm channels 5 timers 1 x 8 bit, 3 x 16 bit interfaces eusart, mi2c, spi, usb2.0 package 40 pin dip, 0.6?, compatible processor 8 bit 18 series picmicro base chip: pic18f2455 oscillator: 4mhz ext., 48mhz internal io lines: 19 a/d: 10 x10 bit a/d sample rate 100ksps program memory 24k bytes ram 2k bytes eeprom 256 bytes power 5v, usb or external pwm channels 2 timers 1 x 8 bit, 3 x 16 bit interfaces eusart, mi2c, spi, usb2.0 package 28 pin, 0.6?, dip compatible ecio-28p 1 2 6 4 5 7 3
ecxx-60-2 picmicro and pic are trademarks of microchip technology inc. arm is a trademark of arm plc. ecio and e-blocks are trademarks of matrix multimedia limited. page 4 copyright ? 2008 matrix multimedia limited 1.usb socket - miniature version 2.3.3v regulator 3.reset switch 4.power / programming led 5. arm microcontroller device 6.18.43 mhz ceramic resonator 7.power selection jumper 8.device pins package details - ecrm40p ecrm40 processor 32 bit, at91 arm 7 core base chip: at91sam7s128 oscillator: 18.43mhz ext, 47.92mhz internal io lines: 34 a/d: 8 x10 bit a/d sample rate 300ksps program memory 128k bytes ram 32k bytes eeprom 0 (internal rom overwrite) power 5v, usb or external pwm channels 4 timers 3 x 16 bit, 2 x 32 bit interfaces 2 x eusart, mi2c, spi, usb2.0 package 40 pin dip, 0.6?, compatible 1 2 3 5 6 7 4
ecxx-60-2 picmicro and pic are trademarks of microchip technology inc. arm is a trademark of arm plc. ecio and e-blocks are trademarks of matrix multimedia limited. page 5 copyright ? 2008 matrix multimedia limited flowcode software flowcode contains standard flow chart icons and electronic components that allow to you to create a virtual electronic system on screen. drag icons and components onto the screen to create a program, then click on them to set properties and actions. design simulate download once your system is designed you can use flowcode to simulate it in action. test the system?s functionality by clicking on switches or altering sensor values, and see how your program reacts to the changes in the electronic system. when you are happy with your design click one button to send the program directly to the ecio device. remove the usb lead and press the reset button and your program starts to run. ? easy to use interface ? allows complex programs to be developed and managed quickly ? all i/o and expansion options are supported in flowcode ? simulation aids understanding ? debug before download ? shorten the design cycle ? one button download ? compiles to c then asm ? link in your own c files ecio devices are fully com patible with flowcode4 - one of the world?s most advanced graphical programming languages for microcontrollers. the great advantage of flowcode is that it allows those with little experience to create complex electronic systems in minutes. flowcod e achieves this in two steps: firstly users drag and drop flowchart symbols onto the screen, and fill in the dialog boxes when prompted. then flowcode compiles the flow chart into code that is downloaded to a microcontroller which executes the program. flowcode is available in ma ny languages including: danish, dutch, english, finnish, french, german, greek, spanish, (full translation) and also: italian, mandarin, romanian, and thai (menus only).
ecxx-60-2 picmicro and pic are trademarks of microchip technology inc. arm is a trademark of arm plc. ecio and e-blocks are trademarks of matrix multimedia limited. page 6 copyright ? 2008 matrix multimedia limited ecio? in use there are several ways of using the ecio: with a prototype board ecio devices are really useful when used in conjunction with a prototype board: the ecio unit simply plugs into the matrix of holes and the surrounding components are wired in using single strand wire. the ecio can be used with an external power supply or the unit can draw power from the usb lead itself. with e-blocks if you have larger projects, or you want to connect more advanced systems together, th en you can use the e-blocks adaptor panel (eb061) shown here. this allows you to connect a large range of boa rds from simple led?s and switches through to can sub-systems, etc. this is ideal for prototyping larger and more complex systems. with your own hardware if you are developing your own hardware you can use the ecio board as a component: adding ecio to your system allows you to develop a product that can be reprogrammed in the field. use with labview, visual basic and other packages ecio can easily be integrated with third party pc based control packages like lab view and visual basic. this is enabled by a dll and a suite of sample programs that can be downloaded to the ecio to provide a fully controllable slave device from pc based applications. using a proto board using ecio with e-blocks using ecio in a custom development labview and visual basic programs running on a ecio
ecxx-60-2 picmicro and pic are trademarks of microchip technology inc. arm is a trademark of arm plc. ecio and e-blocks are trademarks of matrix multimedia limited. page 7 copyright ? 2008 matrix multimedia limited using flowkit with ecio what does it do? the flowkit can be connected to hardware systems to provide a real time debug facility where it is possible to step through the flowcode program on the pc and step through the program in the hardware at the same time. this function is available with flowcode for picmicro v4.2 or later. benefits ? helps to solve programming problems ? seamless program and debug features ? compatible with ecio, miac and formula flowcode systems via the usb lead ? available for flowcode for picmicro v4.2 and later ? allows start, step, and play of programs ? allows users to see and alter variable values description whilst flowcode simulation allows debug of a system to a first pass, flowkit takes debug to a new level by running the program in the hardware and on the screen at the same time. the system is controlled from within the flowcode enviro nment where controls allow users to start, stop, pause and step through their program one icon at a time. under user control the flowcode software shows the location of the program in the flow chart, the value of all variables in the program, and allows users to alter the variable values when the program is paused. ordering information flowkit pack hp299 the flowkit main board the system is controlle d within flowcode 4.2+ where the icon just executed is clearly marked using flowkit with ecio and e-blocks adaptor board note that use of flowkit with ecio for arm is not currently supported.
ecxx-60-2 picmicro and pic are trademarks of microchip technology inc. arm is a trademark of arm plc. ecio and e-blocks are trademarks of matrix multimedia limited. page 8 copyright ? 2008 matrix multimedia limited product codes and ordering eb061 is compatible with all ecio devices - both arm and picmicro. ecio devices 40 pin 18f4455 picmicro device ecio40p 28 pin 18f2455 picmicro device ECIO28p 40 pin at91 arm device ecioarm e-blocks application board - eb061 build your own plc bundle - eb481 the build your own plc bundle includes an e- blocks led board, lcd board, switch board, relay board, opto-isolator board, ecio application board, ecio 40 pin pic board, international power supply, and a full copy of flowcode version 4 for picmicro.
ecxx-60-2 picmicro and pic are trademarks of microchip technology inc. arm is a trademark of arm plc. ecio and e-blocks are trademarks of matrix multimedia limited. page 9 copyright ? 2008 matrix multimedia limited compatible with?.. ...and also... details correct at time of going to press. matrix multimedia reserves the right to change specification. matrix multimedia limited the factory emscote street south halifax, hx1 3an england t: +44 (0) 1422 252380 e: sales@matrixmultimedia.co.uk w:www.matrixmultimedia.com
|
